JayC Posted August 2, 2016 Share Posted August 2, 2016 I have a simple scene setup between a 6 Button Keypad-Linc and a Fanlinc. The one On/Off buttons on the KPL work the Fan Light, and the A Button on the KPL works the Fan Motor. A Button and the Fan Motor work fine however the On/Off buttons and the Fan Light do not. I have tried toggling the Fan Light directly rather than the scene with no luck either. I have the same configuration set up 3x in my home and all have been working perfectly until now. I upgraded to 5.0.4 roughly 2 weeks ago, so I don't believe this is hurting me. Below is the logfile from a scene test. Nothing looks out of the ordinary to me. Any thoughts or help would be greatly appreciated. Tue 08/02/2016 05:52:35 PM : [GRP-RX ] 02 61 11 13 00 06 Tue 08/02/2016 05:52:35 PM : [INST-SRX ] 02 50 32.33.A0 39.00.D3 61 13 11 LTOFFRR(11) Tue 08/02/2016 05:52:35 PM : [Std-Cleanup Ack] 32.33.A0-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Tue 08/02/2016 05:52:35 PM : [CLEAN-UP-RPT] 02 58 06 Tue 08/02/2016 05:52:36 PM : [INST-SRX ] 02 50 34.DE.F6 39.00.D3 61 13 11 LTOFFRR(11) Tue 08/02/2016 05:52:36 PM : [Std-Cleanup Ack] 34.DE.F6-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 <html><font color="red">----- MBRLTOn Test Results -----</font></html> <html><font color="red">[Succeeded]</font> MBRLT (32 33 A0 1)</html> <html><font color="red">[Succeeded]</font> MBRKPL (34 DE F6 1)</html> <html><font color="red">----- MBRLTOn Test Results -----</font></html> Link to comment
JayC Posted August 2, 2016 Author Share Posted August 2, 2016 Disregard my son pulled the cord at the fan. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.