Jump to content

Z-Wave Plus Appliance and light Modules for $20 each til 8/31


danbutter

Recommended Posts

Posted

I don't work for homeseer or anything. Just letting people know that I found these on the homeseer store and I wanted a few for holiday lights and such so I tried them out.

The first one I enrolled I took to my detached garage and it plugged it in about 100 ft away from the closest zwave device inside my brick house.

Didn't do a heal or anything and it worked on the first try!

These do support beaming and may be a halfway decent repeater.  I didn't really have trouble with my zwave network so I don't know how they'll help, but I know they have great range!

 

http://products.z-wavealliance.org/products/1091/embedpics

 

http://benchemail.bmeurl.co/6681D58

scroll down below the locks (at time of posting this anyway)

 

 

Posted

First I've seen "Dragon Tech Z-Wave Plus appliance modules" (PA-100).  I found a few claims this is a house brand for ZwaveProducts.com; ZWP and Amazon have these DragonTech modules at much higher prices, and their listings add a few details:

Biggest claim-to-fame for the 500 chips is improved transmit power (+2.5dBM) and support for all Z-Wave Plus features.

Posted

It seems that the dragon tech stuff is who makes the homeseer stuff. They have different firmware I'm sure, but the on/off modules I bought work really well. Not easy to find anything z-wave for $20 let alone the zwave plus features so I thought I'd share.

Posted

Do the modules reporting status for a program trigger?

Posted

The option is there while writing a program for control and status.  I'm running 5.0.2 it it matters.  All my zwave shows up under (old) in this version.

 

If you have an example program I'll try it for you if you like.

Posted

My concern is that not all Z-Wave devices report/update their status. Do these provide immediate status so as to trigger an program?

Posted

It seems to work fine remotely.  I have made a short program to say if status on then turn on another light and turning it on from an off state remotely works and fires the program.  I'll try to go hit the button on it in a bit.

Posted

These seem like neat devices - especially for $20. I not that although they support accommodations, they do not support the 'scene' class... May not matter to most though...

Posted

Yeah good bang for the buck.

Ok so I took my laptop to where I have one of these plugged in and hit the button and status was updated right away and the program to turn on the other light fired off.  I did it twice and success both times.

 

I'm attaching node details as ISY sees it for anyone curious.

post-6054-0-10908200-1472430703_thumb.png

Posted

That's a test for "Control." Does the device trigger a program if you turn it on or off remotely as opposed to manually (i.e., Status)?

Posted

Well I didn't have any trouble with my zwave mesh, but these things have a lot greater range that what I had before since they are zwave plus.  They do support beaming.

Should be decent for a repeater.  Price of admission isn't all that much to try one.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing

    • No registered users viewing this page.
  • Who's Online (See full list)

    • There are no registered users currently online
  • Forum Statistics

    • Total Topics
      37.2k
    • Total Posts
      372.5k
×
×
  • Create New...