Jump to content

Schedule issues


TomG

Recommended Posts

Hello, new user here.

 

I wrote a simple program to turn on a lamp when either of two entry doors are opened and would like to add a condition so it only works from sunset to sunrise the next day (no sense turning on the lamp during the day). I thought that simply adding a schedule to the if statement would do it, but no dice. The program acts as it did before, ignoring the schedule. What am I doing wrong?

 

Thank,

 

Tom

 

 

Living Room Lamp - [iD 0002][Parent 0001]

 

If

        From    Sunset

        To      Sunrise (next day)

    And Status  'Computer Room Door' is On

     Or Status  'Front Door' is On

 

Then

        Set 'Living Room Lamp' On

        Wait  5 minutes

        Set 'Living Room Lamp' Off

 

Else

   - No Actions - (To add one, press 'Action')

Link to comment

Hi Tom,. and welcome to the forums!

 

Its related to order of precedence. All you need to do is use the "Add and" function in the Admin console, lower right of the program window.

 

If

        From    Sunset

        To      Sunrise (next day)

          and (   

            Status  'Computer Room Door' is On

            Or Status  'Front Door' is On

         )

 

Paul

Edited by paulbates
Link to comment

Probably going to need some parenthesis.

 

If

        From    Sunset

        To      Sunrise (next day)

    And {Status  'Computer Room Door' is On

        Or Status  'Front Door' is On

           }

Link to comment

That fixed it!

 

I thought about parenthesis and looked at the command, but couldn't figure out how to implement it. Now that I look at the user guide specifically for parenthesis, I see it's pretty well explained. Is there a good source of example programs somewhere that I can refer to for help in learning the programming?

 

Paul, I was just in your neck of the woods last week for a burger at Millers Bar. Best burgers in the state!

 

Thanks for the help, guys.

 

Tom

Edited by TomG
Link to comment
Guest
This topic is now closed to further replies.

×
×
  • Create New...