wpmjones Posted February 7, 2017 Share Posted February 7, 2017 I have tried searching for this topic, but as you can imagine, when you search for ISY lights or ISY LEDs, it doesn't want to tell you about the front panel. Our ISY 994iZW is in our bedroom because that's where the network router is. The blue LED on the front panel is amazingly bright when there are no other lights on in the room. I'd love to be able to disable the front panel lights, but can't find any information on how to do so. Has anyone else done this? Link to comment
KeviNH Posted February 7, 2017 Share Posted February 7, 2017 (edited) The power LED is not software controlled, and does serve a useful purpose -- if the ISY power supply is faulty, the power LED will go dark or just faintly lit. There are some Layer-1 approaches to reducing the brightness, see this thread: http://forum.universal-devices.com/topic/20474-isy994-power-led Edited February 7, 2017 by KeviNH Link to comment
Teken Posted February 7, 2017 Share Posted February 7, 2017 LED Dims ========================= The highest calling in life is to serve ones country faithfully - Teach others what can be. Do what is right and not what is popular. Link to comment
stusviews Posted February 7, 2017 Share Posted February 7, 2017 There is no way to control the brightness of the very, very bright blue LED on the front panel. Several posters, including myself, use Light Dims. Link to comment
Teken Posted February 7, 2017 Share Posted February 7, 2017 If a person was on a limited budget they could always use a black sharpie, electrical tape, or filter paper. ========================= The highest calling in life is to serve ones country faithfully - Teach others what can be. Do what is right and not what is popular. Link to comment
stusviews Posted February 7, 2017 Share Posted February 7, 2017 If a person was on a limited budget they could always use a black sharpie, electrical tape, or filter paper. Good suggestions, but I don't believe that $6.48 (including shipping) will impact anyone's budget. And that includes a sheet with more than a hundred Light Dims. At least, not anyone with an ISY Link to comment
Brian H Posted February 7, 2017 Share Posted February 7, 2017 I also have the Light Dims on my ISY994iPro's Power LED. I also dimmed the Off LED in an old 2476S SwitchLinc by working one into the frame without dimming the whole set. Link to comment
Scottmichaelj Posted February 7, 2017 Share Posted February 7, 2017 I use "Light Dims" as well. I am a bit extreme but I also have some in my suitcase and take them with me when I travel and use them in my hotel rooms. Link to comment
larryllix Posted February 7, 2017 Share Posted February 7, 2017 Shoot! Thanks for reminding me too late. I usually carry a few X10 plug-ins and key fob remotes while on vacation. I forgot this time. It's always nice to turn out that lamp in a hotel room from the bed, even if you have to chisel the epoxy out of the receptacle holding the plug in. Sent from a tiny keyboard. Response may be brief. Link to comment
Recommended Posts