little66085 Posted March 14, 2017 Share Posted March 14, 2017 Has anyone used the RF side to operate a pool controller? I would like to automate our pool to work based on sunrise/sunset. currently I need to adjust the run times manually. It is equipped with a remote (RF) station inside, but it cannot be programmed except for repetitive tasks (same time,etc). Thanks! Link to comment
Scottmichaelj Posted March 14, 2017 Share Posted March 14, 2017 Has anyone used the RF side to operate a pool controller? I would like to automate our pool to work based on sunrise/sunset. currently I need to adjust the run times manually. It is equipped with a remote (RF) station inside, but it cannot be programmed except for repetitive tasks (same time,etc). Thanks! For a simple test plug in an appliancelinc into the plug and then plug your pump into it. If you can turn on/off the pump then the Insteon signal is able to reach the pool. Then rip out the Hayward stuff and use a On/Off outdoor Insteon Module. Keep it simple. Link to comment
Recommended Posts