to_lighter Posted March 23, 2009 Share Posted March 23, 2009 Hi gang, A long history of recurrent problems, and I'm (hopefully) seeing the light at the end of the tunnel. Button presses not recognized. KPL buttons being recognized but not correctly (ex. B button being recognized as a keypress from button A). General unreliability. I should mention that I have a bunch of Insteon switches (about 80) and a bunch of KPLs of various types (9 if I am counting correctly), as well as 6 motion detectors. I use a whole bunch of scenes and programs. I could never get a reliable PLM link count, but it was usually greater than 700, and on one occasion was over 1700. Michel and others from ISY had suggested replacing my PLM. I upgraded to a v7A, but still had issues. Today I received my new PLM (v85!), and right off the bat things looked more promising. My most problematic KPL came back to life (except I had to reset the toggle mode .. first all toggle, then selected the toggle mode for each of the secondary buttons that needed adjusting). Feeling giddy I tried the next most problematic KPL. No joy. However, a factory reset (again with a subsequent reset of the toggle modes) and that switch is back to life as well. Now I am going to wander about the house and fix any other problematic KPLs. Hopefully I will be able to report back that all the gremlins are gone. Both myself and my local supplier had some doubts that a new PLM would fix the issues, but it seems to have made a difference so far. If you have a large installation and ongoing issues and the Universal Devices gang recommend a new PLM, I would definitely suggest getting one! Cheers! Link to comment Share on other sites More sharing options...
MikeB Posted March 24, 2009 Share Posted March 24, 2009 Glad to hear you are having better results. Please keep us up-to-date. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.