mike123456789 Posted May 10, 2009 Posted May 10, 2009 I have a Venstar Thermostat. The reading I am getting on the ISY from the thermostat is consistently off by a few degrees. Thermostat reads 70, ISY says 67. Anyone having this issue? I searched around the forums and didn't really see anyone talking about this particular issue, which leads me to believe it may be a hardware issue with my thermostat or INSTEON module for the thermostat. I am able to change settings on the thermostat from the ISY and the changes are almost instantaneous so I don't think it is a communication issue. Thanks, Mike
jwagner010 Posted May 10, 2009 Posted May 10, 2009 Mike, Did you Query the thermostat? The thermostat doesn't automatically send temperature changes, it must be querried. There is a post on the forum with a program that querries the thermostat every x amount of minutes. Not sure if this is your problem, but you should querry the thermostat from the ISY and see if values match.
mike123456789 Posted May 10, 2009 Author Posted May 10, 2009 I could have sworn that I queried before checking, but I must not have. I setup the query every 15 mins, and it appears to be correct now (although it has been the same temp since asking the question). I will report back later if there are any issues. Thanks for your help jwag. Mike
Recommended Posts