Nuttycomputer Posted February 24, 2019 Share Posted February 24, 2019 I had a KPL in our bedroom go bad. it primarily controlled the fan state of a 2475F. Problem is it will not write the updates to the Fanlinc. I don't appear to have a communication problem - It can be controlled just fine and appears to respond in the event viewer but attached is the L3 logs for this ISY-Events-Log.v4.6.2__Sun 2019.02.24 03.48.00 PM.txt Link to comment Share on other sites More sharing options...
paulbates Posted February 24, 2019 Share Posted February 24, 2019 I would try right-clicking on the fanlinc in the admin console and select "restore device" Paul Link to comment Share on other sites More sharing options...
Nuttycomputer Posted February 25, 2019 Author Share Posted February 25, 2019 Restore Device suffered from the same problem. I was able to just delete it and re-add it though and that seemed to work. Link to comment Share on other sites More sharing options...
paulbates Posted February 25, 2019 Share Posted February 25, 2019 That was going to be the next suggestion, or factory reset it and restore device (not sure how hard the factory reset would be on an installed fan). Sometimes they just get confused Paul Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.