thebrack Posted May 27, 2019 Posted May 27, 2019 My programs were not working so did a "restore devices" to get my programs working again and I thought was doing well. except when my wife let me know the water is turned off! I turn the water back on and then it turns itself back off. I've disabled all the programs and it's still happening. I grabbed the log from when I press turn the water on to after it turns itself off but I still can't figure it out. Can anyone else tell what this log is saying? 3D 4E 58 1 is my shutoff valve. (turn water on in the ISY admin console) Mon 05/27/2019 03:24:32 PM : [INST-TX-I1 ] 02 62 3D 4E 58 0F 11 02 Mon 05/27/2019 03:24:32 PM : [INST-ACK ] 02 62 3D.4E.58 0F 11 02 06 LTONRR (02) Mon 05/27/2019 03:24:32 PM : [INST-SRX ] 02 50 3D.4E.58 39.02.4D 2F 11 02 LTONRR (02) Mon 05/27/2019 03:24:32 PM : [Std-Direct Ack] 3D.4E.58-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 05/27/2019 03:24:33 PM : [INST-SRX ] 02 50 3D.4E.58 00.00.01 CF 11 00 LTONRR (00) Mon 05/27/2019 03:24:33 PM : [Std-Group ] 3D.4E.58-->Group=1, Max Hops=3, Hops Left=3 Mon 05/27/2019 03:24:33 PM : [D2D EVENT ] Event [3D 4E 58 1] [DON] [0] uom=0 prec=-1 Mon 05/27/2019 03:24:33 PM : [ 3D 4E 58 1] DON 0 Mon 05/27/2019 03:24:33 PM : [D2D EVENT ] Event [3D 4E 58 1] [ST] [255] uom=0 prec=-1 Mon 05/27/2019 03:24:33 PM : [ 3D 4E 58 1] ST 255 Mon 05/27/2019 03:24:33 PM : [INST-SRX ] 02 50 3D.4E.58 39.02.4D 45 11 01 LTONRR (01) Mon 05/27/2019 03:24:33 PM : [Std-Cleanup ] 3D.4E.58-->ISY/PLM Group=1, Max Hops=1, Hops Left=1 Mon 05/27/2019 03:24:33 PM : [INST-DUP ] Previous message ignored. (a half second passes then this happens) Mon 05/27/2019 03:24:33 PM : [INST-SRX ] 02 50 3D.4E.58 11.01.01 CF 06 00 (00) Mon 05/27/2019 03:24:33 PM : [Std-Group ] 3D.4E.58-->11.01.01, Max Hops=3, Hops Left=3 Mon 05/27/2019 03:24:33 PM : [INST-INFO ] Previous message ignored. Mon 05/27/2019 03:24:36 PM : [INST-SRX ] 02 50 3D.4E.58 00.00.01 CF 13 00 LTOFFRR(00) Mon 05/27/2019 03:24:36 PM : [Std-Group ] 3D.4E.58-->Group=1, Max Hops=3, Hops Left=3 Mon 05/27/2019 03:24:36 PM : [D2D EVENT ] Event [3D 4E 58 1] [DOF] [0] uom=0 prec=-1 Mon 05/27/2019 03:24:36 PM : [ 3D 4E 58 1] DOF 0 Mon 05/27/2019 03:24:36 PM : [D2D EVENT ] Event [3D 4E 58 1] [ST] [0] uom=0 prec=-1 Mon 05/27/2019 03:24:36 PM : [ 3D 4E 58 1] ST 0 Mon 05/27/2019 03:24:36 PM : [INST-SRX ] 02 50 3D.4E.58 39.02.4D 45 13 01 LTOFFRR(01) Mon 05/27/2019 03:24:36 PM : [Std-Cleanup ] 3D.4E.58-->ISY/PLM Group=1, Max Hops=1, Hops Left=1 Mon 05/27/2019 03:24:36 PM : [INST-DUP ] Previous message ignored. Mon 05/27/2019 03:24:37 PM : [INST-SRX ] 02 50 3D.4E.58 13.01.01 CF 06 00 (00) Mon 05/27/2019 03:24:37 PM : [Std-Group ] 3D.4E.58-->13.01.01, Max Hops=3, Hops Left=3 Mon 05/27/2019 03:24:37 PM : [INST-INFO ] Previous message ignored.
thebrack Posted May 27, 2019 Author Posted May 27, 2019 I still don't understand what happened but when I changed the "Momentary hold time" from 2.2 to 0.0 it seemed to fix itself and also reset itself to 2.2 but it's still working correctly.
Brian H Posted May 27, 2019 Posted May 27, 2019 What module are you using to control the water valve? That will help in getting you a clearer answer.
thebrack Posted May 27, 2019 Author Posted May 27, 2019 Of course! Sorry, had frantic family running around. ISY994i (1120) I'm running 4.7.3 now but I just updated it AFTER it started working correctly again.
Brian H Posted May 27, 2019 Posted May 27, 2019 Thanks for the ISY994i model number. What module is the one being controlled by the ISY994i? Like a 2450 I/OLinc maybe?
Recommended Posts