Jump to content
View in the app

A better way to browse. Learn more.
Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Configure Open/Close sensor (2843-222)

Niick_W
in ISY994

Featured Replies

Posted

I'm new to ISY 944i (but I've been programming Insteon devices for years). using F/W V 5.0.15A

I've added all my devices to the PLM, and just added my Open/Close sensors  (2843-222 v40 and v43). All seems good.

I was wondering if there is a way to edit the configuration of these sensors from within the Admin Console, like you can with other devices?

The developer notes show that there are several variables that can be changed for these sensors; such as send 2 groups (ie activate the closed group),  repeat ON or OFF,  LED On/Off, and set LED brightness.

I have changed these values in the past (via various hack methods). See page 27 of the developer notes attached.

I would expect a 'config" button at the bottom of the screen, but it's not there. is this functionality just not in the Admin console?

Thanks,

2843-222dev-102013-en.pdf

1 hour ago, Niick_W said:

I'm new to ISY 944i (but I've been programming Insteon devices for years). using F/W V 5.0.15A

I've added all my devices to the PLM, and just added my Open/Close sensors  (2843-222 v40 and v43). All seems good.

I was wondering if there is a way to edit the configuration of these sensors from within the Admin Console, like you can with other devices?

The developer notes show that there are several variables that can be changed for these sensors; such as send 2 groups (ie activate the closed group),  repeat ON or OFF,  LED On/Off, and set LED brightness.

I have changed these values in the past (via various hack methods). See page 27 of the developer notes attached.

I would expect a 'config" button at the bottom of the screen, but it's not there. is this functionality just not in the Admin console?

Thanks,

2843-222dev-102013-en.pdf 120.71 kB · 0 downloads

 There's really no need to change the configuration. All you really need is the open status and the heartbeat signal.

Being that the developers are constantly changing / updating the device firmware, usually without release notes, it's practically impossible for the ISY to support every option on every device

  • Author

OK, good to know it's not just hidden somewhere.

Guest
This topic is now closed to further replies.
Go to topic listing

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.