hart2hart Posted October 12, 2019 Posted October 12, 2019 I setup DSC system with 38 zones and zones 27-32 were set as Null type and reserved for future use as wireless sensors. The future is here so zones 27 and 28 are now set as zone type 26 which is 24 hour non-alarm type. They are tilt sensors on garage doors. I’ve set DSC and rebooted so they show on keypads with correct names. They show correct status in nodelink and ISY as they were already zones but the new names did not pull to nodelink and hence to ISY. I’ve restarted nodelink and RPi. What step did I miss?
io_guy Posted October 12, 2019 Posted October 12, 2019 Zone names aren't sent from the EVL. You need to set them in the ISY (that's where NodeLink gets them)
hart2hart Posted October 12, 2019 Author Posted October 12, 2019 Zone names aren't sent from the EVL. You need to set them in the ISY (that's where NodeLink gets them) I knew I forgot something simple. Lol
Recommended Posts
Archived
This topic is now archived and is closed to further replies.