simplextech Posted January 19, 2020 Posted January 19, 2020 This event was quite random and I've never seen this for this device. I also get this error from 1 KPL in my kitchen which I have replaced thinking it was bad. Nope. I still get this same error almost every time the KPL is switched on. Now getting this from this switch. Are these devices really going bad this quickly? All of these are about 1 year old maybe a little more/less. I ran a series of queries and I got no errors back and good communications. This is just random.... Event Log: 50 CA 68 1 ERR 0.000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000002020/01/19 17:54:48 System 5 50 CA 68 1 2020/01/19 17:54:48 System -2 50 CA 68 1 ERR 0.000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000002020/01/19 17:54:48 System 5 Event Viewer: Sun 01/19/2020 17:58:33 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:33 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:33 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:33 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:35 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:35 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:36 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:36 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:40 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:40 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:40 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:40 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:40 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:40 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:41 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:41 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:42 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:42 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:42 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:42 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:44 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:44 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:44 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:44 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:45 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:45 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:45 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:45 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:46 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:46 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:47 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:47 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:47 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:47 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:48 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:48 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:49 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:49 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:49 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:49 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:50 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:50 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:50 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:50 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:51 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:51 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:51 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:51 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 01/19/2020 17:58:51 : [ZWAVE-RX ZW003_1] [32/02] CC=0x32 cmd=0x02 [21320000001E000000] ACK,AUTO,EXPLORE From=0x03 Sun 01/19/2020 17:58:51 : [ZWAVE-RX ZW003_001_1] [32/02] CC=0x32 cmd=0x02 [21320000001E000000] ACK,AUTO,EXPLORE From=0x03 Sun 01/19/2020 17:58:52 : [ZWAVE-RX ZW003_002_1] [32/02] CC=0x32 cmd=0x02 [21320000001E000000] ACK,AUTO,EXPLORE From=0x03 Sun 01/19/2020 17:58:52 : [ZWAVE-RX ZW003_003_1] [32/02] CC=0x32 cmd=0x02 [21320000001E000000] ACK,AUTO,EXPLORE From=0x03 Sun 01/19/2020 17:58:52 : [INST-TX-I1 ] 02 62 50 CA 68 0F 19 00 Sun 01/19/2020 17:58:52 : [ZWAVE-RX ZW003_004_1] [32/02] CC=0x32 cmd=0x02 [21320000001E000000] ACK,AUTO,EXPLORE From=0x03 Sun 01/19/2020 17:58:52 : [INST-ACK ] 02 62 50.CA.68 0F 19 00 06 LTSREQ (LIGHT) Sun 01/19/2020 17:58:52 : [ZWAVE-RX ZW003_005_1] [32/02] CC=0x32 cmd=0x02 [21320000001E000000] ACK,AUTO,EXPLORE From=0x03 Sun 01/19/2020 17:58:52 : [INST-SRX ] 02 50 50.CA.68 4C.1B.8A 2F 15 FF LTBRITE(FF) Sun 01/19/2020 17:58:52 : [Std-Direct Ack] 50.CA.68-->ISY/PLM Group=0, Max Hops=3, Hops Left=3
Mecheng70 Posted January 20, 2020 Posted January 20, 2020 I get a communication error every now and again. The devices are typically battery powered zwave devices. Definitely get the errors if my mac goes to sleep and re-awakens. But as you mention, if I query the device or manually operate it, it works.
simplextech Posted January 20, 2020 Author Posted January 20, 2020 The interesting/annoying is that these (now two) random errors are all powered in wall devices. One switch and one KPL. The one I posted about just happened out of the blue and was a first I had seen it for that device. The KPL that was throwing errors I replaced with another KPL I had on hand but it randomly is still throwing errors which leads me to think it's not the device. If it was comm noise I would think the half dozen other devices on the same circuit would throw an error but they don't. Also if noise I would expect to have had it for a while but this is new and these devices have been in place a while.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.