smarthome_newbie Posted May 21, 2020 Posted May 21, 2020 I added two additional lights to an existing scene on a KPL that turns all lights off. The two new lights I added do not turn off when I use the KPL. They both show action as "off" in admin console. If I press the KPL a second time, the two lights will go off along with the two bedroom lights that are programmed to turn on when the scene is on. Any ideas? Thanks!
larryllix Posted May 21, 2020 Posted May 21, 2020 31 minutes ago, smarthome_newbie said: I added two additional lights to an existing scene on a KPL that turns all lights off. The two new lights I added do not turn off when I use the KPL. They both show action as "off" in admin console. If I press the KPL a second time, the two lights will go off along with the two bedroom lights that are programmed to turn on when the scene is on. Any ideas? Thanks! Check your links in the new devices and compare them to what ISY thinks they have. Right click on each device and select it from the pulldown menu.
smarthome_newbie Posted May 21, 2020 Author Posted May 21, 2020 37 minutes ago, larryllix said: Check your links in the new devices and compare them to what ISY thinks they have. Right click on each device and select it from the pulldown menu. Is this what you mean? Not sure what I'm supposed to be checking.
larryllix Posted May 22, 2020 Posted May 22, 2020 1 hour ago, smarthome_newbie said: Is this what you mean? Not sure what I'm supposed to be checking. Close, but check the links of the devices. Then at the bottom you will see a "compare" button that compares the device to ISY.
smarthome_newbie Posted May 22, 2020 Author Posted May 22, 2020 5 minutes ago, larryllix said: Close, but check the links of the devices. Then at the bottom you will see a "compare" button that compares the device to ISY. 5 minutes ago, larryllix said: Close, but check the links of the devices. Then at the bottom you will see a "compare" button that compares the device to ISY. Like this?
smarthome_newbie Posted May 22, 2020 Author Posted May 22, 2020 Just now, larryllix said: Yeah but no conflicts on that device. Do you think I should delete the scene and add it all again?
larryllix Posted May 22, 2020 Posted May 22, 2020 25 minutes ago, smarthome_newbie said: Do you think I should delete the scene and add it all again? It can't hurt and is easy enough to do in ISY. Make sure your battery devices are link enabled, one at a time.
smarthome_newbie Posted May 22, 2020 Author Posted May 22, 2020 Is there an easy way to copy it or do I have to add them all back individually?
PurdueGuy Posted May 22, 2020 Posted May 22, 2020 Sounds like the "On Level" is not set to 0%/Off when the KPL is the controller.
oberkc Posted May 22, 2020 Posted May 22, 2020 11 hours ago, smarthome_newbie said: The two new lights I added do not turn off when I use the KPL. In what mode is your KPL button? "toggle" mode? Is the KPL button ON or OFF once pressed? When you press this button (the first time), what happens to the other lights in the scene? Do they turn ON or OFF? 12 hours ago, smarthome_newbie said: If I press the KPL a second time, the two lights will go off along with the two bedroom lights that are programmed to turn on when the scene is on. To be clear, you press the button a second time and all lights go OFF? Is the KPL button also OFF? Was the KPL button ON or OFF initially (before you pressed it a second time)?
smarthome_newbie Posted May 28, 2020 Author Posted May 28, 2020 On 5/22/2020 at 12:26 AM, PurdueGuy said: Sounds like the "On Level" is not set to 0%/Off when the KPL is the controller. That was it. I feel dumb. Thanks to you and the others for the help!
PurdueGuy Posted May 29, 2020 Posted May 29, 2020 23 hours ago, smarthome_newbie said: That was it. I feel dumb. Thanks to you and the others for the help! Nothing dumb...we all overlook things! Glad it's all working now.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.