First it should be noted; there is no Insteon Network command for the Keypadlincs that can directly control the button LEDs so using a 'follow' scene is the only way it can be done. Keypadlinc LEDs will need to be added as responders in the 'follow' scene.

 

Now on with the program; this scheduled program is intended to keep those keypadlinc LEDs correct each day just in case they somehow get changed.

 

First I created two scenes with all the non-load non-toggle keypadlinc buttons, one scene for the On LEDs and one scene for the Off LEDs.

 

Inside Off LEDs - Scene

• Family Main © Night Off
  Master Main ( Bed Off
  Master Main © Rest Of House Off

Inside On LEDs - Scene

• Family Main (A) Evening Time
  Family Main ( Movie Time
  Master Main (A) Bed Time

Network Keypadlinc LEDs Reset - Schedule Program

 

Then I created this program that launches at 2:59am (so I don't conflict with my 3:00am network query) to update the LEDs. It launches each day and resets all the non-toggle button LEDs to their defaults for my setup.

 

If
       Time is  2:59:00AM

Then
       Set  Scene 'Inside Off LEDs' Off
       Set  Scene 'Inside On LEDs' On

This is just a preventive measure because you should be able to setup your keypadlinc without them changing the LEDs for non-toggle buttons. This is only for when somehow very remote they do get changed.