skisteep Posted January 27, 2021 Posted January 27, 2021 (edited) Just ran into an upgrade issue with a replacement for my old EZFlora(died) with the new RainBee8, all went well until I tried to change the default zone timeout value from 30 minutes to 60 minutes(or another any other value). Using the ISY Options feature for RainBee8, it shows 30 minutes for all the zones, when I change it to say 60 minutes, the PEEK and POKE look good, but it doesn't save the new value, and also reverts to 1 minute. I've tried many things like move closer to PLM, etc, no change. Any ideas would be appreciated I'm currently using the ISY 994i with firmware version 4.8.0 Wayne PS. I reached out to Smartenit for help, but got no response, hopefully someone on the forum can help UPDATE: Was able to reach Smartenit support, they determined that the firmware needed to be upgraded to fix the Timeout change problem. They provided me with a prepaid shipping label and returned with re-flashed firmware in a week, all works now. Edited February 13, 2021 by skisteep Update
Recommended Posts