Light switch turns on another switch - help!

[zg825]

I have found an odd qwirk in my lighting system and having trouble to find a solution. For my basement, I have a keypad switch at the top of the steps where it will turn on the steps (through a load). I have another toggle switch in the basement that turns on the hallway light in the basement. 

 

When I hit the actual basement toggle switch, it will also turn on the step lights along with the hallway light. If I hit the basement toggle switch through my mobilinc, then only the hallway light turns on (basement stair light does not turn on). I looked through my programs and there is no mention of the basement toggle switch.   When i looked at the membership level, it is only a member to two scenes (all off, and basement dim). 

 

I cant figure out why this is causing my stair lights to turn on / off when the actual hallway switch is pressed. everything works as expected when pressed through an app. 

 

Anyone have suggestions on what to troubleshoot?

[hart2hart]

Restore the switches via ISY. You’ve likely got a link in the switches that’s not in the ISY.

[zg825]

Thank you hart, have a link on how to do that?

[gzahar]

Right click the device and select "Restore device".

[apostolakisl]

before restoring them you can do a "show device links table", then hit compare to see if ISY has it the same.  If they are the same, then you have orphan links and a simple restore device will just put the same links back on.  In that case, you need to factory reset the devices, delete them from ISY, then start over from scratch.

[zg825]

Okay, thanks for the advice. I was able to get it working by doing the restore. Another issue came up in the meantime from a power outage which affected around 40 devices. I had to manually pull out the set button to cycle the power.