bgrubb1 Posted July 27, 2021 Posted July 27, 2021 I re-capped one and plugged the serial daughter board in wrong. Pretty sure I blew the daughter board. Please PM me ...Barry
Brian H Posted July 28, 2021 Posted July 28, 2021 (edited) The main board is double sided (may have a layer in the middle not too sure). The board has plated through component holes. Between the top and bottom runs. If you took a plated hole out stuck to a capacitor lead. You then have no connection between the two sides. You may want to give the original parts a look at and see if any of them have a plated through via stuck to it. That may give you some added information on the serial or main board problems. Been there and did it myself. Edited July 28, 2021 by Brian H Revise information
Recommended Posts