n8huntsman Posted October 26, 2021 Share Posted October 26, 2021 I got an RGBGenie ZW-3002 wall touch panel. I have added this device and it created several nodes. Only one, ZW 008 Basic Control 2, reports a status of 0 or 255 when I press the power button on the device. I was able to create a scene with that to turn on my zooz rgb controller but that only gives me on/off capability. None of the other buttons appear to do anything on any of the nodes. I have tried changing the "ZW 008 Multilevel Switch 2" to 26.01 Multilevel Switch Set but that didnt seem to change anything. When pressing buttons, I get activity in the event viewer so I know it's seeing something. For example, pressing the blue button I see the following: Mon 10/25/2021 07:46:58 PM : [ZWAVE-RX ZW008_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x08 Mon 10/25/2021 07:46:58 PM : [ZWAVE-TX ] ... Mon 10/25/2021 07:46:58 PM : [ZWAVE-RD ] [01110013080A3305030200032004E0012500DA]REQ ZW_SEND_DATA Is there anything else I can try? I also ordered an RGBGenie RGB z-waze controller zw-1002, in hopes that being the same brand, the touch panel will talk to the controller, but Im afraid I'll still need a hub to create the links? I've been waiting for years for a wall panel like this that will allow me to control the under-counter lights via automation AND the touch panel. This is the closest I've gotten. I had a wifi controller and wall panel but I couldnt figure out the protocol to send it network resource commands. Any help pointing me in the right direction is appreciated. Link to comment Share on other sites More sharing options...
Recommended Posts