Since my PLM bit the dust and I received the USB version I am officially moving to ISY on Polisy. I shut down my ISY994i and decided that I am going to stick with the Polisy version of ISY. So, after getting through some speed bumps with the help of support I am moving on. I am setting up Polisy one device at a time. For me it was time to move on.

I may have encountered my first device/program issue and it includes Sunrise/Sunset (Next Day) with a Motion Sensor II.

Program 1: The basic program works perfectly WITHOUT Sunset/Sunrise.

Program 2: Added Sunset/Sunrise and the Car Port light comes on, but does not turn off. Tried reversing the order of sunset/sunrise and motion sensor in the "IF", with no luck. Worked fine on the old ISY.

PGM-1
Lights - Car Port - [ID 000D][Parent 0001]

If
        'Motion Sensor - Car Port' Status is On
    
Then
        Set 'Lights - Car Port - On-Off Mo' On
        Wait  1 minute and 15 seconds
        Set 'Lights - Car Port - On-Off Mo' Off
 
Else
   - No Actions - (To add one, press 'Action')

PGM-2
Lights - Car Port - [ID 000D][Parent 0001]

If
        'Motion Sensor - Car Port' Status is On
    And From    Sunset 
        To      Sunrise (next day)
 
Then
        Set 'Lights - Car Port - On-Off Mo' On
        Wait  1 minute and 15 seconds
        Set 'Lights - Car Port - On-Off Mo' Off
 
Else
   - No Actions - (To add one, press 'Action')

 

Check the top of your admin console and see if you are located in LA Cal.

Sent from my SM-G781W using Tapatalk

Miami,  and the Sunrise time and Sunset time is/was correct.

36 minutes ago, Mustang65 said:

Miami

Hi neighbor !!!

Dunedin,

Howdeeee