Bob Chase Posted July 9, 2022 Share Posted July 9, 2022 (edited) I guess I need some help I bought a used 2444a2 Remote Link2. Gave it a 1st birthday. Cleared my Java. Put the remote into set (slow blinking green). Tried to link using the "Link a Remote Link2" option then I tried to link using the "New Insteon Device" option. My ISI is running 4.9.0 software. The 2444a2 does not appear in any of the drop down lists. Did ISY stop supporting the remote? Edited July 9, 2022 by Bob Chase Link to comment Share on other sites More sharing options...
Techman Posted July 11, 2022 Share Posted July 11, 2022 The ISY fully supports the remotelinc2. Being that the remotelinc is an RF only device it must be with close range of either a dual band device or the PLM. What's the address of the remotelinc (xx.xx.xx)? Link to comment Share on other sites More sharing options...
Bob Chase Posted July 11, 2022 Author Share Posted July 11, 2022 I solved this one. Sorry, I responded to the previous replys, which I thought would have been part of this thread. Apparently, Mr. Bill and others replied elsewhere. Again, sorry. Link to comment Share on other sites More sharing options...
MrBill Posted July 11, 2022 Share Posted July 11, 2022 9 minutes ago, Bob Chase said: I solved this one. Sorry, I responded to the previous replys, which I thought would have been part of this thread. Apparently, Mr. Bill and others replied elsewhere. Again, sorry. No the forum crashed and ate the replies. I just had to retype a long explanation in another thread. Link to comment Share on other sites More sharing options...
Brian H Posted July 11, 2022 Share Posted July 11, 2022 Glad you found the problem. Information only. I also got some replies eaten up so your responses where also missed. Link to comment Share on other sites More sharing options...
Recommended Posts