matapan Posted October 13, 2022 Posted October 13, 2022 I had the occasion to turn some circuit breakers on and off several times while working on installing some new outlets in my house. The circuits power cycled have some Z-Wave devices on it. Apparently, power cycling these Z-Wave devices didn't do them any good, as I am getting strange communication errors now for these devices. According to the wiki page article on communication errors, there should be an option in the Z-Wave menu in the Admin UI for healing the Z-Wave network. I cannot find this menu pick or its parent called Tools. Is the Wiki page outdated? I am on firmware version 5.3.4 on an ISY994i with the Z-Wave plus board.
Mecheng70 Posted October 13, 2022 Posted October 13, 2022 From the tips and tricks section: Quote If you are running 5.3 and above, network heal is no longer there. This isn't on UDI but zwave itself no longer supporting network heal (official zwave +) along with the fact that network heal caused more issues than it solved. 500 series devices are self healing. Should a heal need to be done, you would do it on individual devices by right clicking on the device you want to update and using update neighbors.
Recommended Posts