Chris Jahn Posted February 1, 2023 Posted February 1, 2023 * IoX = ISY on Anything. Welcome to ZMatter Z-Wave+ Beta v5.5.5 ! Features Z-Wave Network Heal Option to set communication speed (for supporting older Z-Wave devices) Rewrite all links (associations) X-Ray for all node types Bug Fixes Associations and Scenes Links (Fixes issues with scenes and many status reports from devices) Some Binary Sensors not reporting status Green icons indicating pending writes to the device Node address conflicts for Alarm / Alarm Sensor / Binary Sensor ZEN34 / ZEN17 / ZEN16 / ZSE42 supported Central Scene Controller nodes missing in some cases Insteon/X10: Not decoding X10 responses correctly Getting Started Make a backup of Polisy (Admin Console | File | Backup IoX ) Launch the Admin Console, go to the Configuration tab, click on Update Packages. Warning, this might take a while depending on how current your OS is Once completed (4 beeps + 1), unplug Polisy If you are using INSTEON, make sure the PLM is connected Power up your Polisy note that initial boot might take a much longer time than normal because udx might want to install missing packages to assist with migration (in the future) Once boot up is complete, Launch Admin Console Migrating to ZMatter Z-Wave+ Here are the instructions for migrating your Z-Wave network from ISY-994 or Polisy/Eisy to ZMatter Z-Wave+ https://wiki.universal-devices.com/index.php?title=Eisy:User_Guide#Migration Here are the installation instructions for those of you with a ZMatter Z-Wave board (not USB dongle): ZMatter-Assembly- Instructions.pdf (universal-devices.com). Ensure that the antennas are connected in the proper location (Z-Wave = yellow band, on the left. Zigbee = red band, on the right) 4
Recommended Posts