Support discussion for IoX 5.5.5
Ok that is further than I got, I did not get the extra nodes.
P2, P3 = 11 is for momentary garage door to isolate the inputs from outputs
P2, P3 = 10 is dry contact sensor.
Anything for P2, P3 4 and above should bring extra nodes re: instructions.
P10 and P11 do not persist through an exclude/include only P2, P3 do.
I have excluded/included about half dozen times... even updated firmware to 1.20, factory reset and no luck so far seeing any of these extra nodes.
When