Chris Jahn Posted March 7, 2023 Share Posted March 7, 2023 * IoX = ISY on Anything. Welcome to ZMatter Z-Wave+ Beta v5.5.9 ! Features Initial support for Insteon I3 Devices (I3 4-Button keypad, I3 Dual outlet, I3 Dial, I3 Paddle) Preparation for remote PG3 Preparation for move to PG3x (on Polisy) The Admin Console now notifies you of the different stages of the upgrade process. i.e. reboot, do nothing, update available, upgrading Bug Fixes Z-Wave Network Heal (should improve response time for door locks) Z-Wave Smoke Alarm not reporting events (also impacts CO/CO2/Water Valve) System value in programs: first Day Of Year is 1 (was incorrectly 0) Nodes not always saved to file system after synchronization 'Event received for a different subscription' error dialog Spurious Update Available messages Getting Started Make a backup of Polisy or eisy (Admin Console | File | Backup IoX ) Launch the Admin Console, go to the Configuration tab, click on Update Packages. Warning, this might take a while depending on how current your OS is On eisy If you are using INSTEON, make sure the PLM is connected Restart the Admin Console and make sure you are on 5.5.9. You will be notified of what should be done next including a reboot On Polisy Once completed (4 beeps + 1), click on Admin Console | Polisy System | Reboot If you are using INSTEON, make sure the PLM is connected Power up your Polisy note that initial boot might take a much longer time than normal because udx might want to install missing packages to assist with migration (in the future) Once boot up is complete, Launch Admin Console Migrating to ZMatter Z-Wave+ Here are the instructions for migrating your Z-Wave network from ISY-994 or Polisy/Eisy to ZMatter Z-Wave+ https://wiki.universal-devices.com/index.php?title=Eisy:User_Guide#Migration Here are the installation instructions for those of you with a ZMatter Z-Wave board (not USB dongle): ZMatter-Assembly- Instructions.pdf (universal-devices.com). Ensure that the antennas are connected in the proper location (Z-Wave = yellow band, on the left. Zigbee = red band, on the right) 3 Link to comment Share on other sites More sharing options...
Recommended Posts