user181 Posted February 14 Posted February 14 Are there high density I/O devices similar to the EZIO8SA? This product has been on my wish list for a while, but I waited too long and now it’s discontinued. So, I’m looking for something comparable which would be more elegant than a silly amount of I/O Lincs to get enough input & output channels.
Techman Posted February 14 Posted February 14 If you have, or want to add, zwave then take a look at these: ZOOZ ZEN17 UNIVERSAL RELAY – ZOOZ (getzooz.com) Zooz ZEN16 MultiRelay – ZOOZ (getzooz.com)
user181 Posted February 14 Author Posted February 14 I use a Din IV Relay by digital loggers That looks interesting. I’d be interested in hearing how you interface it with your controller.
atmarosi Posted February 14 Posted February 14 It has a full API. Network resources on the ISY side for each ON/OFF. Bob’s your uncle.
EricBarish Posted February 14 Posted February 14 I've been using CAi web control (a little old, $35) on my ISY 994 and then on Polisy. Can control and get results using network resouces or download nodelink ( need a PI ) and get the node for this device. No PG3 node for this device. 8 digital inputs 8 digital outputs 3 andlog input 8 optional DS18B20 digital temp, 1 optional humidity sensors built-in I2C and SPI support, up to 1000 line PLC program 1
user181 Posted February 15 Author Posted February 15 I've been using CAi web control (a little old, $35) on my ISY 994 and then on Polisy. Can control and get results using network resouces or download nodelink ( need a PI ) and get the node for this device. No PG3 node for this device. 8 digital inputs 8 digital outputs 3 andlog input 8 optional DS18B20 digital temp, 1 optional humidity sensors built-in I2C and SPI support, up to 1000 line PLC program Thanks, Eric. That looks like a great solution.
user181 Posted February 15 Author Posted February 15 Does the CAI WebControl require the add-on networking module in the ISY994? That is another thing I missed the boat on, and didn’t discover until it was too late that you can no longer purchase add-on modules for the 994.
EricBarish Posted February 15 Posted February 15 If you us nodelink no (but you need the pi to load nodelink and the CAI node and a ISY portal account) . If you us network resources yes. Time to upgrade you system ? That will give you the network resouces, but you will still need the PI to run nodelink to get the CAI node, no PG3 node for CAI devices. I updated two years ago to a polisy, PG2/3 was very unstable on the PI. Nodelink is still running on the PI and never have a problem with it.
Recommended Posts