Good Evening All,

I've been a long-time ISY-994i / Insteon user and lurker on these forums, but never had the need to ask a question -  largely because there is such wealth of information from this incredibly knowledgeable group! But now I am well beyond stumped and could really use some help.

I'm looking for Z-Wave Configuration and Association Parameters for my Kwikset SmartCode 888 door locks. The manual says it's available on the website, but it's [now] nowhere to be found. I tried Kwikset support, and they haven't been able to provide. It definitely existed at one point, otherwise I wouldn't have been able to program my ISY-994i. I imagine these parameters are manufacturer specific, so I guess there's no universal resource?

The worst part of it all is everything had been working flawlessly over the last two years, until I ran into a slight issue and started to do some factory resets. Adding the devices back has been a problem, but even worse is now I can't redo the ISY programs not having the configuration parameters (I seem to recall a few dozen). Can't believe I never saved this info, but heck you can find anything on the internet, right???

Also, is it possible the Z-Wave Plus module has weakened over time? I noticed when adding back the Z-Wave devices, I had to bring the ISY-994i in close proximity to the devices, something I didn't have to do originally.

So all the nice automation programs... text and e-mail messages for low-battery, lock jammed, battery replacement, unlock by user, and with the ZooZ ZEN17 unlock from the Avaya phone system, automatically arm and disarm the alarm system, auto lock the doors after 10:00 at night, and more... all gone! Without the configuration parameters, both Kwikset 888 locks are almost useless.

Up the proverbial creek without a paddle? 

Any assistance of course would be greatly appreciated. 

All the best,

Joe

This link should provide the information you are looking for:

https://products.z-wavealliance.org/products/2176?selectedFrequencyId=2

17 hours ago, JJMSystems said:

Also, is it possible the Z-Wave Plus module has weakened over time? I noticed when adding back the Z-Wave devices, I had to bring the ISY-994i in close proximity to the devices, something I didn't have to do originally.

It's not weaker. Devices need to be close to the isy when adding