MarkJames Posted April 26 Posted April 26 (edited) I must be missing something fundamental. I've got my eISY running, I've installed the bluetooth plugin and it shows connected. I put my bluetooth device (Samsung Levelbox slim) in pairing mode and confirm it is available by scanning for it with my phone. I run ioX launcher and the bluetooth service is there marked disabled. I change that to enabled but there's no way to make that 'stick' - no apply or save button. So I hit 'scan for devices' but that doesn't seem to do anything. Am I missing a step? [edit] I was on too early of a firmware - I didn't notice it required 5.8 Edited April 26 by MarkJames
Solution Techman Posted April 26 Solution Posted April 26 On the bluetooth service select ENABLED, then click on the SERVICE button to the left. If that doesn't work then go into PG3 and restart the bluetooth service. Once the service is enabled click on "Scan for Bluetooth Devices"
MarkJames Posted April 26 Author Posted April 26 Ah - Thanks. The 'service button' is the 'apply' in this case. Much appreciated.
Recommended Posts