DAbrams Posted January 4 Posted January 4 My IRLink stopped working and I could not get the ISY admin console to work so I gave up and replaced the IRLink with a spare Raspberry Pi that I had lying around. It uses an inexpensive ($3) IR receiver/demodulator sensor and connects to the ISY through ethernet. It uses the same IR codes as the IRLink so I did not have to make any modifications to my universal remote control. I have attached a write up of what I did if anyone is interested. Should work with any of the Universal-Devices controllers that support the REST interface. David 2024-12-19 SmartHome Insteon IR Remote Receiver.pdf
Recommended Posts