MTellevik Posted July 21 Posted July 21 I am trying to add an Insteon 2334-232 6 Button Keypad to my EISY. Message comes up: The following device could not be added 58.80.94 - Cannot determine Insteon Engine I've tried autodiscover; Using Manual the 2334-232 is not listed so I tried using the 5 button 2334 and tghe 8 button. differnt outlets; tried resetting the switch Not sure what else to do? Quote
Techman Posted July 21 Posted July 21 (edited) "Cannot determine Insteon Engine" usually means that the PLM is unable to communicate with the device. Verify that the device address is correct, it's not uncommon to misread the 8 and the B If you're still having issues, then relocate the PLM to a different outlet. Note: the 6 button KPL is recognized as the 5 button KPL by the system, the on and off buttons are treated as one button.. Edited July 21 by Techman Quote
Solution Guy Lavoie Posted July 21 Solution Posted July 21 Alternately, click on "Start Linking" (under Link Management at the top in Iox) and then press the link button on the keypad module. Quote
MTellevik Posted July 21 Author Posted July 21 That worked! THANK YOU! Also old Eyes read 50.80.94 on the switch, it was actuall 50.8D.94 Now it's found. Quote
Guy Lavoie Posted July 21 Posted July 21 5 minutes ago, MTellevik said: Also old Eyes read 50.80.94 on the switch, it was actually 50.8D.94 You aren't the first...you won't be the last 😁 Quote
Brian H Posted July 21 Posted July 21 Glad you found it and it is not an uncommon thing to happen. Some stickers where harder than others. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.