paulw Posted Wednesday at 01:06 AM Posted Wednesday at 01:06 AM (edited) Unit was powered down to rearrange location, same router and network. After powerup never appears in DHCP table. Tried shutting down by 6 button taps, nothing. Hold button will force a shut down, removed power waited a couple of minutes powered up, waited few minutes nothing in DHCP table. As a long shot tried a different network cable. This is a unit which has been functioning fine for years. Any thoughts? Edited Wednesday at 01:07 AM by paulw Quote
Guy Lavoie Posted Wednesday at 01:39 AM Posted Wednesday at 01:39 AM You might need to hook up a hdmi monitor and keyboard, and see how it comes up. Have you tried reconnecting it back where it was to see what happens? Quote
paulw Posted Wednesday at 01:54 AM Author Posted Wednesday at 01:54 AM It is back where it came from, same everything just a different location on shelf. Quote
Techman Posted Wednesday at 02:51 AM Posted Wednesday at 02:51 AM Is the network led on the back of the eisy lit? It sounds like an ethernet cable issue. Try removing power from the eisy for about 30 seconds Quote
paulw Posted Wednesday at 03:06 AM Author Posted Wednesday at 03:06 AM Yes led on eisy and router lit, I also replaced the cable no difference. I have powered down and forced a restart several times, no joy. The only thing I have not done is a factory reset. Quote
hart2hart Posted Wednesday at 09:53 AM Posted Wednesday at 09:53 AM Yes led on eisy and router lit, I also replaced the cable no difference. I have powered down and forced a restart several times, no joy. The only thing I have not done is a factory reset.Is it plugged in to same port on the router? If different port, it could be disabled or configured differently. Quote
paulw Posted Wednesday at 02:45 PM Author Posted Wednesday at 02:45 PM 4 hours ago, hart2hart said: Is it plugged in to same port on the router? If different port, it could be disabled or configured differently. Yes, everything the same. I did do a reset, no joy. Hooked up a monitor as see what appears to be a boot and a request to login which would only take the default which makes me think the reset worked. Backed out at that point. I did open a support ticket this AM. Quote
Techman Posted Wednesday at 07:38 PM Posted Wednesday at 07:38 PM @paulw Once you're up and running could you post the steps you took to get it resolved. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.