killervette Posted November 25, 2010 Posted November 25, 2010 I have a keypadlinc with 8 buttons. I have a togglelinc controlling my outside lights. I want button be to control those lights, since A is the porch lights. How can I get the keypad button B to light up when I turn on the lights via the togglelinc. I found this but it doesnt work. I cannot adjust the keypad in the scene. http://www.universal-devices.com/mwiki/ ... ow_Program
LeeG Posted November 25, 2010 Posted November 25, 2010 killervette Define an ISY Scene with the ToggleLinc as the Controller and the specific KeypadLinc Button B (?) as the Responder if all you want is KPL button B to show the ToggleLinc status. If you want to Control the ToggleLinc from KPL button B as well define the KPL button B as a Controller of the same Scene. You will have two Controllers of the Scene with no explicit Responders defined. The ISY assumes a Controller is a Responder if the device has responder capability. Once the Scene has been defined and written into both devices either will control the lights and both will reflect On/Off status (assuming both are defined as Controllers). Lee
killervette Posted November 25, 2010 Author Posted November 25, 2010 killervette Define an ISY Scene with the ToggleLinc as the Controller and the specific KeypadLinc Button B (?) as the Responder if all you want is KPL button B to show the ToggleLinc status. If you want to Control the ToggleLinc from KPL button B as well define the KPL button B as a Controller of the same Scene. You will have two Controllers of the Scene with no explicit Responders defined. The ISY assumes a Controller is a Responder if the device has responder capability. Once the Scene has been defined and written into both devices either will control the lights and both will reflect On/Off status (assuming both are defined as Controllers). Lee worked great..thanks
Recommended Posts