detrotdr Posted February 3, 2011 Posted February 3, 2011 I want to do a Good Night Mode with my 2430 ControLinc. when pressing button #5 OFF, I want to run a scene that turns almost everything off (double check that most lights are off... certain appliance modules and I/O contact closures etc) -This is not a problem.. I have it running now. I don't want button #5 ON to take all those that I turned off (or double checked is off) and turn them all ON. -(Example.. #5 OFF turns fireplace off... or in the morning I don't want all the lights going on.. just a couple) So how do I make #5 ON do something different then reversing #5 OFF? ****If there is no way of doing this.. which I really hope there is... can I disable #5 ON so I don't have to worry about someone accidentally pressing it and turning everything on??**** Thank-you in advance.
LeeG Posted February 3, 2011 Posted February 3, 2011 detrotdr Remove ControLinc button 5 as Controller of the Scene. Trigger an ISY Program with an If Control “ControLinc button 5†Off that Sets the Scene Off. Another ISY Program can be triggered with button 5 On and perform some other activity. Lee
detrotdr Posted February 3, 2011 Author Posted February 3, 2011 Thank-you Lee. I understand now. (The force is with you!) :>
Recommended Posts