andyf0 Posted March 13, 2011 Posted March 13, 2011 I've installed the garage door kit and everything seems to work fine except I cannot get the IOLinc to respond to an OFF command. I've tried Momentary B and Momentary C modes, either setting does exactly the same thing, only responds to an ON command regardless of the sensor being on or off. It's a V36 IOLinc. Is there anything else I need to do?
andyf0 Posted March 14, 2011 Author Posted March 14, 2011 Just in case someone else does what I did, I found the problem. You can't use the relay device directly and expect it to behave the way the instructions lead you to believe by sending it on and off commands. It only responds to on commands. However, if you put the relay device in a scene then you can turn the scene on and off and it will function as described in the instructions.
LeeG Posted March 14, 2011 Posted March 14, 2011 andyf0 Thanks for posting the solution. Apologies, I somehow missed your initial post. The Scene versus Direct commands to the IO Linc Relay is also documented in the following post. http://forum.universal-devices.com/view ... highlight= Lee
andyf0 Posted March 15, 2011 Author Posted March 15, 2011 LeeG, Thanks, sometimes the search doesn't reveal all. That's exactly it.
Recommended Posts