Playing with Event Viewer with Device Communications I always see this when turning a device on or off. This is turning a Lamplinc on and off with a RemoteLinc.

 

Fri 03/25/2011 06:36:22 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 11 00 LTONRR (00)

 

Fri 03/25/2011 06:36:22 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:22 AM : [ 11 AF F4 1] DON 0

 

Fri 03/25/2011 06:36:22 AM : [ 11 AF F4 1] ST 255

 

Fri 03/25/2011 06:36:22 AM : [ 14 52 EE 1] ST 168

 

Fri 03/25/2011 06:36:23 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 11 00 LTONRR (00)

 

Fri 03/25/2011 06:36:23 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:23 AM : Duplicate: ignored

 

Fri 03/25/2011 06:36:23 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 11 00 LTONRR (00): Process Message: failed

 

Fri 03/25/2011 06:36:23 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:23 AM : [iNST-SRX ] 02 50 11.AF.F4 18.CF.62 41 11 01 LTONRR (01)

 

Fri 03/25/2011 06:36:23 AM : [standard-Cleanup][11.AF.F4-->ISY/PLM Group=1] Max Hops=1, Hops Left=0

 

Fri 03/25/2011 06:36:32 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 13 00 LTOFFRR(00)

 

Fri 03/25/2011 06:36:32 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:32 AM : [ 11 AF F4 1] DOF 0

 

Fri 03/25/2011 06:36:32 AM : [ 11 AF F4 1] ST 0

 

Fri 03/25/2011 06:36:32 AM : [ 14 52 EE 1] ST 0

 

Fri 03/25/2011 06:36:32 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 13 00 LTOFFRR(00)

 

Fri 03/25/2011 06:36:32 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:32 AM : Duplicate: ignored

 

Fri 03/25/2011 06:36:32 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 13 00 LTOFFRR(00): Process Message: failed

 

Fri 03/25/2011 06:36:32 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:32 AM : [iNST-SRX ] 02 50 11.AF.F4 18.CF.62 41 13 01 LTOFFRR(01)

 

Fri 03/25/2011 06:36:32 AM : [standard-Cleanup][11.AF.F4-->ISY/PLM Group=1] Max Hops=1, Hops Left=0

 

It's the Process Message Failed that concerns me. Also, the Duplicate: ignored message a problem?

andyf0

 

This can be ignored when using a RemoteLinc and any other RF only device such as a Motion Sensor or TriggerLinc. RF only devices send multiple Group Broadcast messages (2 or 3 total). The ISY trace is indicating multiple Group Broadcast messages are received with the extra ones are being ignored. Wired devices send one Group Broadcast message (per Insteon protocol).

 

Lee

There you go. I saw them with the RemoteLinc and the new Motion Sensor I installed. Thanks for the info.