Residual X10 in the Logs

[gadgetfreak]

I am trying to troubleshoot some other issues I am having with the switches not reporting back their state to the ISY unless a query is run (but that is in another thread). When I ran a log, I saw that I, as recently as the last 24 hours, had several instances of X10 activity. Although I started as an X10 system and slowly switched over first to a hybrid system and then to an insteon-exclusive system, I am wondering what these X10 actions can be and if they are affecting my current setup. I don't see anything in my ISY admin console having to do with X10 so I am wondering if anyone has any ideas how I can research this further. I still have a few X10 switches installed but they are only connected to power (not to any devices) and are not being used. I wouldn't mind removing all X10 from my ISY setup. Thx.

[fitzpatri8]

Are you sure you don't still have a CM11a or CM15a or x10 HawkEye or Eagle Eye battery-operated motion detector hidden away in an unused corner or closet somewhere? How about x10 floodlights with motion detectors? Are any of your neighbors using x10 controls?

[gadgetfreak]

Definitely no motion sensors or floodlights. I have no idea if my neighbors use x10. As for any other devices, I am not 100% sure but I don't think I have anything else besides the old model 4 toggle wall switches. Any other way to check?

[Brian H]

Do you have any X10 Repeaters or older Smarthome BoosterLincs or X10 SwitchLincs with BoosterLinc features?

 

Older BoosterLincs and SwitchLincs with BoosterLinc technology are know problems. Including communications interference.