Insteon - Keypadlinc & Switchlinc w/99i status update

[Mike Ippolito]

Trying to see if I have this setup right or I'm missing something:

 

I have a keypadlinc controlling my dining room light. On the opposite wall I have a switchlinc to control it also. The load is on the keypadlinc. I setup a scene in the 99i for the dining light and added both switches. I'm expecting the switchlinc to update it's led status based on the on/off status of the dining room light when controlled by the keypadlinc but it is not. When I control the light (scene) with the 99i the led correctly shows in the on position - but not when I use the keypadlinc.

 

Is this normal behavior? Shouldn't the switchlinc update itself?

[LeeG]

mikeiud

 

The ISY Scene should have the SwitchLinc and the KeypadLinc button as Controllers of the Scene. This definition will result in the devices being cross-linked and both will reflect status.

 

Sounds like one of the devices was added as a Controller and the other added as a Responder. When a device is a Controller of a Scene it is assumed to also be a Responder if the device has responder capability.

 

Lee