skoondy Posted December 31, 2007 Share Posted December 31, 2007 Hi, Happy New Year! I'm wondering if it's possible for the ISY to turn on/off a lamplinc whenever a FastOn/FastOff is detected from a nearby switchlinc? Thanks, Chris Link to comment
jdva Posted December 31, 2007 Share Posted December 31, 2007 Chris, You can do this with a simple program on the ISY. If Control 'Kitchen Fan Switch' is switched Fast On And Control 'Kitchen Fan Switch' is not switched Fast Off Then Set 'Kitchen Fan' On Else Set 'Kitchen Fan' Off Substitute your devices and it should work fine. Of course, If you have a local load on the switch it will activate also. Good Luck, -jeff Link to comment
MikeB Posted January 1, 2008 Share Posted January 1, 2008 Thanks for this code Jeff! I was currently doing my fast on/off triggers with 2 separate programs. Didn't realize I could do it with 1. Link to comment
jdva Posted January 2, 2008 Share Posted January 2, 2008 Thanks for this code Jeff! I was currently doing my fast on/off triggers with 2 separate programs. Didn't realize I could do it with 1. Sure! This may be the only case where one is better than two. Link to comment
skoondy Posted January 6, 2008 Author Share Posted January 6, 2008 Thanks for the code! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.