Avonlea22 Posted July 13, 2011 Posted July 13, 2011 I set up a couple of programs to turn on my motion sensor at night when I approach my front door. I used an example found elsewhere on this forum, but it doesn't seem to work. It doesn't seem to sense any motion. Can someone guide me in the right direction? First program: If From Sunrise - 10 minutes To Sunset + 10 minutes (same day) Then In Scene 'Front Porch Motion-Sensor' Set 'Porch Lights' 0% (On Level) Else - No Actions - (To add one, press 'Action') 2nd program: If From Sunset + 10 minutes To Sunrise - 10 minutes (same day) Then In Scene 'Front Porch Motion-Sensor' Set 'Porch Lights' 70% (On Level) Else - No Actions - (To add one, press 'Action') On the MS itself, I have all jumpers in the off position. Thanks!
LeeG Posted July 13, 2011 Posted July 13, 2011 In the second Program, it should be To Sunrise -10 minutes (next day) If From Sunset + 10 minutes To Sunrise - 10 minutes (same day) As coded the To time is before the From time
Recommended Posts