gakran Posted September 4, 2011 Posted September 4, 2011 I am still having Insteon issues, running 2.8.6 firmware on ISY. I started a reconfigure devices option on the ISY99. It completed two of the devices (icon changed from green arrow to light bulb/other icons), but has not made any more progress after 30 minutes. If I look at the event log (below), the last few lines listed repeat over and over. I suspect one device is having trouble being configured. Can I reset this process? Do I delete the troublesome device? Any thoughts are appreciated. Sat 09/03/2011 05:19:28 PM : [standard Msg. Handler] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11 Sat 09/03/2011 05:19:28 PM : [ Time] 17:19:29 0(0) Sat 09/03/2011 05:19:28 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00) Sat 09/03/2011 05:19:28 PM : [standard Msg. Handler] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11 Sat 09/03/2011 05:19:29 PM : [ Time] 17:19:29 0(0) Sat 09/03/2011 05:19:29 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00) Sat 09/03/2011 05:19:29 PM : [standard Msg. Handler] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11 Sat 09/03/2011 05:19:29 PM : [ Time] 17:19:30 0(0) Sat 09/03/2011 05:19:29 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00) Sat 09/03/2011 05:19:29 PM : [standard Msg. Handler] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11 Sat 09/03/2011 05:19:30 PM : [ Time] 17:19:30 0(0) Sat 09/03/2011 05:19:30 PM : [iNST-ACK ] 02 62 0B.F9.F7 0F 28 0F 06 SET-MSB(0F) Sat 09/03/2011 05:19:30 PM : [iNST-SRX ] 02 50 0B.F9.F7 14.84.DE 27 28 0F SET-MSB(0F) Sat 09/03/2011 05:19:30 PM : [standard-Direct Ack][0B.F9.F7-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 Sat 09/03/2011 05:19:30 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00) Sat 09/03/2011 05:19:30 PM : [standard Msg. Handler] Unexpected Ack imCmd=62 cmd1=LTONRR 0x11 Sat 09/03/2011 05:19:30 PM : [b F9 F7 1 ] Link 0 : 0FF8 [A2001484DEFF1F00] *Failed Writing [A2001484DEFF1F00] Sat 09/03/2011 05:19:31 PM : [ Time] 17:19:31 0(0) Sat 09/03/2011 05:19:31 PM : [iNST-ACK ] 02 62 0B.F9.F7 0F 2B F8 06 PEEK (F8) Sat 09/03/2011 05:19:31 PM : [iNST-SRX ] 02 50 0B.F9.F7 14.84.DE 27 2B A2 PEEK (A2) Sat 09/03/2011 05:19:31 PM : [standard-Direct Ack][0B.F9.F7-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 Sat 09/03/2011 05:19:31 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00) Sat 09/03/2011 05:19:32 PM : [ Time] 17:19:32 0(0) Sat 09/03/2011 05:19:32 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00) Sat 09/03/2011 05:19:32 PM : [ Time] 17:19:33 0(0) Sat 09/03/2011 05:19:32 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00)
LeeG Posted September 4, 2011 Posted September 4, 2011 gakran If the post was not a finger check and the ISY is at 2.8.6 move to 2.8.16. It looks like a Program is running in a loop. A Scene is repeatly being turned On. Sat 09/03/2011 05:19:28 PM : [iNST-ACK ] 02 62 00.00.10 CF 11 00 06 LTONRR (00) This is interferring with the update. Disable all the Programs and see if that helps. Lee
gakran Posted September 4, 2011 Author Posted September 4, 2011 Yes, that should read 2.8.16. There was a program running, but after stopping it the ISY was still behaving worse and worse. I reformatted the SD card, restored, re-configured all devices and everything seems fine now. I did notice one loss of communication message, that recovered on the next try. I may have to reposition one of the access points. Thanks for the help.
gakran Posted September 4, 2011 Author Posted September 4, 2011 Yes, that should read 2.8.16. There was a program running, but after stopping it the ISY was still behaving worse and worse. I reformatted the SD card, restored, re-configured all devices and everything seems fine now. I did notice one loss of communication message, that recovered on the next try. I may have to reposition one of the access points. Thanks for the help.
Recommended Posts