blartyo Posted January 11, 2008 Share Posted January 11, 2008 Hi, I created a simple scene with several devices acting as 'Responders'. - Some of the devices are part of 3-ways. - For the devices that were part of 3-ways, I only added to the scene the device that directly controls the load. - I turn on the scene. - It works fine, but the LED's of the 3-way devices (that aren't part of the scene) no longer properly reflect the status (on/off) of the light. How can I ensure that the LED's of all the (secondary) 3-way devices I have continue to accurately reflect the status of the light they control? Thank you. Link to comment
Sub-Routine Posted January 11, 2008 Share Posted January 11, 2008 You will have to include the no-load switches in the scene and set them to the same state as the device with the load. Rand Link to comment
blartyo Posted January 11, 2008 Author Share Posted January 11, 2008 Okay, thanks. So much for trying to save a few links. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.