Buzzhazz Posted October 28, 2011 Share Posted October 28, 2011 I'm having a problem with toggling that I am guessing must be a defect, but I thought I'd post the issue here in case I'm just missing something. I want to program my 'D' key as an All Lights Off for the lower level, and I want the LED to be always off, so I am attempting to set it up as Non-Toggle Always Off. I'm doing the same thing with another KPL on the opposite end of the room, and that one works fine and does what I want it to do. The problem I am having with the first one is that I am unable to get the 'D' key to shift to Non-Toggle Always Off mode using either the ISY or through the KPL itself. When I use the ISY, it tells me it's in the mode I want, but the 'D' key remains lit. When I try to put any other key on that KPL into the Non-Toggle Always Off mode, it works just fine, but with the 'D' key, I can only get into Toggle mode or Non-Toggle Always On. Any ideas? It's a 2486D v.36 Thanks in advance. Link to comment Share on other sites More sharing options...
LeeG Posted October 28, 2011 Share Posted October 28, 2011 buzzhazzard Not being able to configure it using only the device indicates a device issue. Probably a defective device but before replacing it try a Factory Reset first. It will be necessary to do a Restore Device for it to be functional under the ISY after the reset. If D will not enter non-toggle Off mode after the Factory Reset it is defective. Lee Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.