mlvarnell Posted February 9, 2012 Share Posted February 9, 2012 It has just occurred to me that you could use an exterior ac outlet to broadcast an all on or all off, with a resulting trigger of your I/O Linc garage door controller! I haven't tried to prove this yet, but I will soon. Any thoughts? Link to comment
LeeG Posted February 9, 2012 Share Posted February 9, 2012 Only if the Controller you plugged into the outside outlet is linked to the I/O Linc Relay. All On/All Off uses a special Scene (Group) number but the responder (I/O Linc Relay) must have a responder link record for the Controller sending the All On/All Off. Link to comment
gatchel Posted February 10, 2012 Share Posted February 10, 2012 This really only applies to Remotelinc's and controllinc's, right? Link to comment
LeeG Posted February 10, 2012 Share Posted February 10, 2012 They are the only devices I am aware of that have All On/Aff buttons. Easy enough to generate an All On or All Off with some custom software and a PLM. Would not work for the same reason, the I/O Linc would not have a responder link for the Controller (PLM). Link to comment
mlvarnell Posted February 10, 2012 Author Share Posted February 10, 2012 sorry for the fuss, but thanks for the info! I still have a lot to learn... Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.