Set scene levels in program?

[dzarn]

I would like to make the light in my bedroom come on to only 50% when turned on from dusk to dawn, and 100% during the day. The light is on a FanLinc, if that matters. I have 2 programs setup now, but apparently I'm missing something. The light stays at 100% on level all the time.

 

I'm turning it on with button A on a 6-button KPL, or an 8-button RemoteLinc, both of which are controllers in the 'Master Bed Light' scene? Any ideas what's wrong?

 

 

OnLevel Day:

If
       Time is Sunrise + 15 minutes

Then
       In Scene 'Master Bed Light' Set 'Master Bedroom FanLinc-Light' 100% (On Level)
       In Scene 'Master Bed Light' Set 'Master Bedroom FanLinc-Light' 0.2 Sec (Ramp Rate)

Else
  - No Actions - (To add one, press 'Action')

 

OnLevel Night

If
       Time is Sunset  - 15 minutes

Then
       In Scene 'Master Bed Light' Set 'Master Bedroom FanLinc-Light' 50% (On Level)
       In Scene 'Master Bed Light' Set 'Master Bedroom FanLinc-Light' 2.0 Sec (Ramp Rate)

Else
  - No Actions - (To add one, press 'Action')

[LeeG]

The Controller (KPL button and RemoteLinc button) has to be identified in the first paramenter of the Set Scene statement, not the Scene name.