iostream212 Posted August 27, 2012 Posted August 27, 2012 I have a scene with two controllers: one a kpl button and the other a light. The cross link works as expected: turn on the light manually and the kpl button lights up. However if i turn the device on from the admin console or mobilinc the kpl button does not light up. Can this be done without a program? Thanks!
LeeG Posted August 27, 2012 Posted August 27, 2012 Turn the Scene On/Off rather than an individual device. Sending Insteon Direct commands to control an individual device does not involve the Scene at all which is why only the specific device responds. EDIT: using MobiLinc tapping the device button normally turns the Scene On/Off when MobiLinc is aware that the device is a Controller of a Scene. This feature does not exist in the Admin Console. With the Admin Console scroll down to the Scenes. Then turn the Scene On/Off.
iostream212 Posted August 27, 2012 Author Posted August 27, 2012 Thanks for the clarification. Makes sense now! Sent from my Galaxy Nexus using Tapatalk 2
Recommended Posts