ISY Gets Power From PLM

[Exten]

When the ISY gets it's power from the insteon PLM.....just what kind

of power is the PLM supplying? Is the supplied power adherent to the

802.3af standard? Is the insteon wart supplying 5VDC, same as the

wart supplies?

 

It looks like the ISY box runs from 5Volts when using the wart.

 

Here's my vote to have the next hardware revision use POE according to the

803.2af standard...48VDC, up to 15 watts. Or 803.2at (POE+) if necessary.

And through the Ethernet port too....not the other serial port that connects to the PLM.

[LeeG]

The 2412 PLM (NO LONGER BEING SOLD) provides 12V DC

 

The 2413 PLM provides no power

 

The ISY spec indicates 5-30V DC