EWhite

2 motion sensors are showing but not reporting. They show fine in the yolink app and show online.. once again I'm foiled again by this great technology.... here is the NS log 2022-12-06 17:30:05,962 MQTT udi_interface.interface INFO interface:_message: Successfully set key = notices 2022-12-06 17:30:05,999 Thread-15 udi_interface INFO udiYoMotionSensorV2:start: start - udiYoLinkMotionSensor 2022-12-06 17:30:06,006 Thread-15 udi_interface INFO yoLink_init_V2:subscribe_mqtt: Subscribing deviceId d88b4c02000305cb to MQTT 2022-12-06 17:30:07,694 Thread-4 udi_interface INFO udi-YoLink:addNodes: adding/checking device : Storage Motion Sensor - MotionSensor 2022-12-06 17:30:07,707 Thread-4 udi_interface INFO udi-YoLink:addNodes: Adding device Storage Motion Sensor (MotionSensor) as 8b4c020003054c 2022-12-06 17:30:07,747 Thread-4 udi_interface.interface INFO interface:addNode: Adding node Storage Motion Sensor(8b4c020003054c) [None] 2022-12-06 17:30:07,761 Thread-4 udi_interface.custom INFO custom:_save: Sending data customparams to Polyglot. 2022-12-06 17:30:07,821 Thread-20 udi_interface INFO udi-YoLink:handleLevelChange: New log level: {'name': 'INFO', 'level': 20} 2022-12-06 17:30:07,850 Thread-21 udi_interface.custom INFO custom:_save: Sending data notices to Polyglot. 2022-12-06 17:30:07,888 Thread-22 udi_interface.custom INFO custom:_save: Sending data notices to Polyglot. 2022-12-06 17:30:07,910 MQTT udi_interface.interface INFO interface:_message: Successfully set key = customparams 2022-12-06 17:30:07,949 MQTT udi_interface.interface INFO interface:_message: Successfully set key = notices 2022-12-06 17:30:07,999 MQTT udi_interface.interface INFO interface:_message: Successfully set key = notices 2022-12-06 17:30:08,095 Thread-24 udi_interface INFO udiYoMotionSensorV2:start: start - udiYoLinkMotionSensor 2022-12-06 17:30:08,102 Thread-24 udi_interface INFO yoLink_init_V2:subscribe_mqtt: Subscribing deviceId d88b4c020003054c to MQTT 2022-12-06 17:30:09,799 Thread-4 udi_interface INFO udi-YoLink:addNodes: adding/checking device : YoLink Hub - Hub 2022-12-06 17:30:09,817 Thread-4 udi_interface INFO udi-YoLink:addNodes: Hub not added - ISY cannot do anything useful with it 2022-12-06 17:30:14,843 Thread-4 udi_interface.interface INFO interface:updateProfile: Sending Install Profile command to Polyglot. 2022-12-06 17:30:15,321 MQTT udi_interface.interface INFO interface:_message: Profile installation finished 2022-12-06 17:30:38,232 Thread-15 udi_interface ERROR yolink_mqtt_classV2:initNode: MotionSensor not online 2022-12-06 17:30:40,220 Thread-24 udi_interface ERROR yolink_mqtt_classV2:initNode: MotionSensor not online

moved sensors around all over in combinations and still cannot get position 1 and 2 to report...it shows good data in logs, just not in CP. no biggie.... would rather have the rain and soil moisture and lightning working.. Thanks!

ok.. I updated the firmware on my WS-2000...that fixed the lightning battery, but all others are still showing low. just fyi so you aren't chasing ghosts... I will move a sensor back to the 1 or 2 position and see if firmware also fixed that issue.

well.. tried the PG3 Tuya-Devices NS and it fails...cannot connect to my devices. anyone got ideas? wanna program one up? I'll guinee pig the hell out of it.. hehehe

strange deal....I physically moved the sensors from position 1 and 2 and placed them on 5 and six and they work now. im still showing a ghost 1 and 2 and expect to for a while until data is exhausted. just wanted to let you know.

from what i can see in the log..you are correct in your assumptions. It is indeed seeing the sensors, its recognizing the data, and it is sending it to ISY. just not sure why the ISY is not replicating the data as it does for sensor 3 and 4... strange

I tried restarting console, even cleared cache and re-downloaded IoX... I sent profiles also...still no go... so main works, indoor works, sensor one shows but no data in console, sensor two is same, sensor 3 and 4 both show data and work as expected. Also.. every battery shows low, I just replaced every battery in this system last week... they are all good... Im running a WS-2000 system

2022-11-25 22:16:29,486 Thread-1 udi_interface INFO station:CreateNodes: Whitehouse 2022-11-25 22:16:29,486 Thread-1 udi_interface WARNING station:CreateNodes: Unknown key: dateutc 2022-11-25 22:16:29,488 Thread-1 udi_interface WARNING station:CreateNodes: Unknown key: eventrainin 2022-11-25 22:16:29,489 Thread-1 udi_interface WARNING station:CreateNodes: Unknown key: lightning_day 2022-11-25 22:16:29,489 Thread-1 udi_interface WARNING station:CreateNodes: Unknown key: lightning_time 2022-11-25 22:16:29,490 Thread-1 udi_interface WARNING station:CreateNodes: Unknown key: soilhum1 2022-11-25 22:16:29,491 Thread-1 udi_interface WARNING station:CreateNodes: Unknown key: soilhum2 2022-11-25 22:16:29,492 Thread-1 udi_interface WARNING station:CreateNodes: Unknown key: lastRain 2022-11-25 22:16:29,493 Thread-1 udi_interface WARNING station:CreateNodes: Unknown key: lightning_hour 2022-11-25 22:16:29,494 Thread-1 udi_interface WARNING station:CreateNodes: Unknown key: tz 2022-11-25 22:16:29,495 Thread-1 udi_interface WARNING station:CreateNodes: Unknown key: date mainly curious into the soil moisture and rain keys....lightning would be nice too... also my first 2 addon sensors show in admin console but never update. 3 and 4 work and update. logs show they are, but they are dead in console.

same issue...

same...

Cant login to Portal...HTTP error 500 when trying to login and Alexa service is dead...

i saw the PG3 version, but am confused about what it can control maybe... Im not using bulbs.. im using switches. i dont need DIRECT control.. control via API through cloud would be fine... would think it would be somewhat easy for someone who knows what they are looking at and for since there is a ton of API stuff out there for it. ill give the PG3 version a try, see what it does, as soon as i get my Polisy fixed...

Amazon of course has loads of wifi items using the smartlife/tuya brand. I have a few now myself and seem to work really well. Im no programmer, but i have seen tons of info on API's out there for smatlife/tuya. I even found a website : https://smartathome.co.uk/smartlife/index.html that just uses your login info. Lots of info on reddit which is also where i found this website. I would gladly pay for a decent node server for this platform, and im sure others would too as it seems to be a huge selling brand on amazon.. Thanks!

i removed the "not true" line... double checked that presence controller is showing true...go open door and get an email still... what the heck is going on ???

i have completely confused myself on this.. i know its something stupid i am missing... i want to have door sensors send me a notification, but only when i am NOT home. what i have so far is still sending notifications even when i am home. Doors - [ID 0004][Parent 0001] If 'Presence Controller / my_phone' On Network is False And 'Presence Controller / my_phone' On Network is not True And ( 'Front Door Sensor' Status is On Or 'Back Door Sensor' Status is On Or 'GarageHouseDoor- Door Sensor' Status is On Or 'GarageBackDoor- Door Sensor' Status is On ) Then Send Notification to 'Mail' Else - No Actions - (To add one, press 'Action') what am i missing....brain fried...and thanks

also down...