richardl007

The time is correct in the upper left corner of the Admin Console. "What actually happens to the status LEDs?" nothing, they used to dim when the sleep program ran, but now nothing changes on the leds. Also when i go directly to the "led brightness" button and change it from 255 to 2 nothing happens to the leds. I was always able to dim them in the past "Under Programs | Summary does the Last Run Time column show the expected time for the Program ?" Yes I run the "then in mt sleep program and the else in my morning program. If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then Set '3 Upstairs / Master BR / Master BR Closet' 1% (Backlight Level) Set '3 Upstairs / Master BR / Master BR Lamp' 2% (Backlight Level) Set '3 Upstairs / Master BR / Master BR Lamp 3W' 2% (Backlight Level) Set '3 Upstairs / Master BR / Master BR Main Lights' 2% (Backlight Level) Set '3 Upstairs / Master BR / Tracy's Controler / Tracy Controler' On 0 / Off 0 (Backlight Level) Set '3 Upstairs / Master BR / Master Side Lamp (AP)' 2% (Backlight Level) Set '3 Upstairs / Master BR / Master Bathroom / Vanity' On 0 / Off 0 (Backlight Level) Else Set '3 Upstairs / Master BR / Master BR Closet' 100% (Backlight Level) Set '3 Upstairs / Master BR / Master BR Lamp' 100% (Backlight Level) Set '3 Upstairs / Master BR / Master BR Lamp 3W' 100% (Backlight Level) Set '3 Upstairs / Master BR / Master BR Main Lights' 100% (Backlight Level) Set '3 Upstairs / Master BR / Tracy's Controler / Tracy Controler' On 4 / Off 1 (Backlight Level) Set '3 Upstairs / Master BR / Master Side Lamp (AP)' 100% (Backlight Level) Set '3 Upstairs / Master BR / Master Bathroom / Vanity' On 4 / Off 1 (Backlight Level)

i'm trying to get the led of a 2476s v.37 to lower to 2 at night. This used to work fine until ma few weeks ago. My ISY is at 3.1.4

I have a program that turned of the leds in my bedroom at night. It no longer works, does anyone have any suggestions why?

Thanks, i tried from work and everything is good now.

When I try an update i get an error. Upgrade Failed: Failed uploading file(reported written size is invalid)

Thanks you. So putting in the second repeat is the answer i needed.

Is it possible to do this? If status 'lamp' is on Then Repeat 5 times lamp beep wait 2 seconds set 'light' on else What I'm trying to ask is it possible to have an action after the repeat command that doen't repeat? So in this case it would beep 5 times then turn on a light.

It was my Ted5000 that was interfering with my lighting system.

i have around 65 insteon things in my house. all without issues. I have many dimmers that don't flicker, only the new dual band ones are doing it. I just installed one one a lamp and it flickers as well.

5 X 40W=200W

i just installed a second 2477d dual band and it flickers as well. This on is on a chandelier on normal incandescent lights.

They are not low voltage lights. they are halogen pot lights (MR16/GU10base)

i just installed a 2477d on 2 halogen pot lights and they flicker every 60 seconds or so. does anyone know why?

fixed, thanks for the tip. I looked at the event viewer and saw that nothing was going there. I then looked at the plm and saw that the links were gone. So i restored the plm and everything is good now.

it seems like the programs aren't running

I've been running a ISY99I now for many months with no problems. Today when I got home I noticed that the programs that use "fast off" (double tap down) don't work. I rebooted but it didn't help. Has anyone had this happen to them?

in the main tab, when i choose a light switch (2476s swithchlink) it says LED Brightness at the bottom. it is set to 0 but the led is on?

What does the number represent? to goes from 0-255 ?

the web server stops working every day. reboot it and it works fine. Everything else still works but i can't log into it through a web browser.

I have a 2450 - Smarthome IOLinc - 1 Input - 1 Output plugged into my garage, with a sensor attached to the door. I want the door to close if it's left open for more the 15 minutes. How do I do this? If Status 'garage sensor' is on Then Wait 15 minutes set 'garage' on

I have a motion detector that i want it to turn on some lights when i walk into the room. But when I'm leaving the room it won't let me turn the lights off. The light turns off then right back on? If status 'main room' is off and status 'Motion sensor-senor' is on Then Set 'main room' on Else - no action

in the configuration I'm setup to Montreal, Canada but it's showing me: Jan/9th/2010 rise: 8:21:53AM set: 5:05:54PM but when i look it up on the web, it should be: rise: 7:33AM Set: 4:30PM

this is