EJones01

OK...its been an hour....so shutdown, removed the old dongle and rebooted. After a few minites the new board seems to have been recognized as the Z-Wave menu appeared. My two Z-Wave devices are showing red ! What next?

I followed the instructions to migrate. Answered all the questions and made the backup. The instructions say it should reboot...but its been 20 mins and it hasn't? Do I manually reboot, will it automatically start to restore, do I remove the old dongle, do I do a restore, what events should we be looking for in the event viewer? The instructions are not very clear. FYI: I only have 2 Z-Wave devices. v5.5.4

Thanks...this does make sense if true. This needs updating if so. ISY-99i/ISY-26 INSTEON:Replacing a Device - Universal Devices, Inc. Wiki (universal-devices.com) I have a couple more devices to replace so I'll move everything out of folders and see what happens

It only says the device should not be in a folder....not scenes. If its scenes too then the documentation needs updating. FYI if the devices are not in the root then it doesn't even give the option to replace.

Yep, that seems to be the only way.....its an 8 button keypadlinc across 10+ scenes so it would be nice if the replace worked. I have a lot of old line communication devices I'm slowly replacing. I hope this gets looked at.

Thanks..I updated but don't see anything changed or relating to this in the release notes. I don't see a way to make a device a controller once its already in a scene. Is it even possible?

Polisy...I'll update but I presume I'll have to rebuild all my scenes as the replace has already happened. Are there release notes for this update?

Polisy Firmware and UI = 5.4.5 Keypadlinc Dimmers. I also tried to replace a micro module dimmer and had the same issue. For that one I had to remove the controllers from the scenes and add back to get them to work. Its as though even though they are listed as a controller (in red) in the scene they aren't anymore. the issue does seem to be related to this default text? If I remove the controller from the scene and add back...it says On instead and works correctly

I have tried this twice with two different module types. I select replace and the new device and the Admin Console goes through the motions and replaces the device in all my scenes etc. It then quits and I restart it. All looks OK, the new device is there in the scenes and all the settings look good. BUT it doesn't work. I activate the screen either from the new switch or from the Console...nothing happens. The only thing that does work is simply turning in the switch from the Console. What am I doing wrong? Edit: I'm noticing it says default in the Actions?

Thank you so much for this clear description (and Geddy). I suspect it was the from field that was causing my issue. All working OK now!

What port is that...I used 587 for TLS(like Geddy) and 465 for SSH ?

I have the same issue. I've tried gmail and my comcast account, both come up with the -1 error ? FYI Use default works fine with my work email but with all three of my Microsoft email addresses I got 2 or 3 through and then nothing. looks like they are getting blocked. r.

Thanks for your help, I understand its not supported. Can Windows PuTTy be used? I get this from that: [admin@polisy ~]$ sudo pkg search adb pkg: Repository FreeBSD missing. 'pkg update' required pkg: packagesite URL error for pkg+http://pkg.FreeBSD.org/FreeBSD:13:amd64/latest/meta.conf -- pkg+:// implies SRV mirror type pkg: packagesite URL error for pkg+http://pkg.FreeBSD.org/FreeBSD:13:amd64/latest/meta.txz -- pkg+:// implies SRV mirror type pkg: packagesite URL error for pkg+http://pkg.FreeBSD.org/FreeBSD:13:amd64/latest/packagesite.pkg -- pkg+:// implies SRV mirror type pkg: packagesite URL error for pkg+http://pkg.FreeBSD.org/FreeBSD:13:amd64/latest/packagesite.txz -- pkg+:// implies SRV mirror type pkg: Repository FreeBSD cannot be opened. 'pkg update' required I also get this from update: [admin@polisy ~]$ sudo pkg update Password: Updating FreeBSD-base repository catalogue... Fetching meta.conf: 100% 163 B 0.2kB/s 00:01 Fetching packagesite.pkg: 100% 13 KiB 13.1kB/s 00:01 Processing entries: 100% FreeBSD-base repository update completed. 147 packages processed. Updating FreeBSD repository catalogue... pkg: packagesite URL error for pkg+http://pkg.FreeBSD.org/FreeBSD:13:amd64/latest/meta.conf -- pkg+:// implies SRV mirror type pkg: packagesite URL error for pkg+http://pkg.FreeBSD.org/FreeBSD:13:amd64/latest/meta.txz -- pkg+:// implies SRV mirror type repository FreeBSD has no meta file, using default settings pkg: packagesite URL error for pkg+http://pkg.FreeBSD.org/FreeBSD:13:amd64/latest/packagesite.pkg -- pkg+:// implies SRV mirror type pkg: packagesite URL error for pkg+http://pkg.FreeBSD.org/FreeBSD:13:amd64/latest/packagesite.txz -- pkg+:// implies SRV mirror type Unable to update repository FreeBSD Updating udi repository catalogue... Fetching meta.conf: 100% 163 B 0.2kB/s 00:01 Fetching packagesite.pkg: 100% 27 KiB 27.3kB/s 00:01 Processing entries: 100% udi repository update completed. 87 packages processed. Error updating repositories!

Can you log into here? ISY portal

It seems to be back again now

This is now the second time in as many weeks the portal and hence Alexa has been down?

I'm trying to get the Nvidia Shield control working (I already use AVRemote for Denon) I understand that I need to install the adb tools, but the only info I have found doesn't work. (sudo pkg install android-tools-adb) Any help would be appreciated.

OK, thats fair enough. Any ideas on how to remove the nodes i added to PG3 from PG2...or doesnt it matter?

I bought a Policy a couple of weeks ago and have it all setup with a few node servers. I love it! BUT I've just discovered it was all setup on PG2. I followed the instructions to migrate to PG3 and 2 of my node servers now show up in PG3. But it appears some node servers I were using on PG2 are now a cost option on PG3 so didn't migrate? I just spent nearly $500 and I have to now spend another $100 to get these node servers that were free on PG2? Also I can't seem to remove the two I did migrate from PG2. Its pretty confusing to me, any help would be appreciated. Thanks Eddie

Rebooted and its all working again

I think the dongle has USB connection issues, you only have to look at it for it to disconnect. Buying a USB extension cable to see if that helps.

I have no web control or Alexa control this morning ?

Unfortunately I don't get the remove or add windows up, so cant do any of this. Yesterday it was working fine.

I can still control the devices I had already added, just not add anymore. If you click the Add button in ISY does the add window open ?

I also have this error now (Unrecognized firmware 7.15). Was working OK yesterday. This is on a brand new Polisy (4 days ago)