RRoyceus

CMDWhen I am synchronizing my UD Mobile I keep getting an error “Could not match CMD split …. In family 10”. Any idea what this means and how to corrrect it?

There is a new node server in the store, iopool. It works great to monitor Ph, ORP, and temperature. The price is reasonable!

Zigbee Water Valve , Tuya Smart Water Valve, Model SM-AZ713 https://www.amazon.com/gp/product/B0B9SR4LCL/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

I got it working! I love the app!

Can you explain how to install the HousePanel.groovy app?

None of node servers on PG3 will start. PG2 are working. All three are installed in version 2, but are stopped. PG3 v3.1.23 status "connected" IOX v5.6.2status "connected" I am running ISY on Polisy None of the node servers will start, though each time I try, i get the green "Node Server started successfully" message in the lower right corner of the screen, though they do not start. I have Upgraded the packages in the admin console. I have Insttaled the dev. Packages. I tried both at least 3 times. The upgrade packages stops with 5 beeps, No beeps on the install dev package. I ahve already order the new Eisy. Any other steps to try or just wait until I get the Eisy?

I am trying to get the polyglot v3 Node Server working. What is hubEndpt?

The board arrived late yesterday. I installed it and restored the backup from my ISY. The Z-Wave devices did nor come over. I uninstalled the devices from my ISY one by one and installed them in the policy as I uninstalled them. I worked several hours and got about half my devices installed. I decided to quit for the night. I tried to back up the Z-Wave and discovered that there was not a backup in the menu. Then I noticed the Learn mode had disapeared. I go up this morning and decided to uninstall the rest of the Z-Wave devices from the ISY. I factory reset the Z-Wave module in the ISY, removed it, then unplugged the ISY. When finished with it, I uninstalled the Z-Wave devices in the Polisy. Still no learn mode. I reset the dongle and learn came back. Still no backup in the Z-Wave menu. Before enrolling I do an un-enroll. As soon as I enroll any device, learn mode goes away. Any suggestions.

I wanted to upgrade my Z-Wave module. It shows out of stock. Is this just a temporary thing? Any idea when it will be available?

I have not tried to log in to my Polisy for a few months. I tried to login tonight and after entering the username and password then hitting Login, nothing happens. I also tried the default admin, admin. I tried to login in using putty using the default username and password (admin, admin) and I connected. I don't think that I forgot my username or password, but it is possible. Any suggestions?

I can not enable disabled programs from the Ap

You can reboot from both Polisy and the UD Mobil.

I have rebooted the Polisy, the Polygot, and the ISY numerous times. I am hoping that I can get an answer in the forum before opening a ticket.

I have been having trouble with my ISY. Today I went into the Polisy Dashboard. All of my Nodes show "No Details Available" and the status is "Unmanaged". I added another instance of one of them and it shows connected, but there is no way to delete the first one. How can I get them back connected or delete the ones that are unmanaged and start over?

Now it worked. I must have had a bad connection earlier

I am using IOS. I will try again

In programs, i do not understand the drop down for Enable, True, False. I assumed that I could use the drop down to disable a program, choose disable, but that does not appear to work. What is the drop downs purpose?

I have both a SmartThings and a Hubitat that could be used. They are both turned on and Working. I got them to try and test zigbee devices on a very limited basis. My problem is there is no menu choice to shift control.

I should have been clearer. I am attempting to shift control to another controller, but that is not an option in my menu. I posted my Z Wave version only because the prerequisites mentioned 4.55 and I wondered if the option was not their because I had upgraded to the newer Z Wave board. My problems with my Z Wave Network will be posted in another place when I get the missing shift control issue solved.

I have been having problems with my Z Wave network. In the Z-Wave prerequisites section it saysIf you have not already done so, please ensure your Z-Wave firmware is 4.55 (Z-Wave | Advanced | Z-Wave Firmware Version). If not, you will need to upgrade the Z-Wave firmware to 4.55:If you have not already done so, please ensure your Z-Wave firmware is 4.55 (Z-Wave | Advanced | Z-Wave Firmware Version). If not, you will need to upgrade the Z-Wave firmware to 4.55: when I look, the screen says: Library Static Controller Z Wave Version 6.81 (not 4.55) Bootloader Version 0.00 When I go toZ-Wave tab, I do not have a line to shift control to another controller. What is the problem?

I received my Polisy and have it running. Can I moved NodeLink to the Polisy and retire my Pi?

No, only Z Wave devices

I finally got this working by erasing all files in the node directory and re-running the script. After restarting, I had to go into config and set up the ISY, then had to add back my devices.

I looked at re.local. It appears to be correct. I ran 'mono -O=-aot NodeLink.exe' from the node directory. NodeLink freezes.

I was out of town a week and reran the script when I go back. I still have errors when starting NodelInk