macjeff

That’s probably why it’s not working for me. Is there any chance you could send me an example of exactly how to put it in there under custom configurations. I know my counter names will be different but I wanna make sure I have them today and tomorrow correct. There are no instructions after you get the original authentication done which is working but then it’s stuck

I have the same issue with the new version 1.01 and just tried with 1.02. When I first authenticate I paste the token and choose save. then all my calendars show up in the grey configuration box but never in ISY. If I restart the Node server the calendars never come back in the grey area or the ISY. Do I need to add them as a key field in configuration or something?

It’s already been imported as is to PG3. I think it was just a direct import and not a rewrite with latest api

Although most of my delays are under a minute like you said, I have had a few really weird ones where a few minutes later the program just randomly seems to run where the status was updated instantaneously. I think it’s related though.

TEAMWORK!!! I wish the US Gov could work together so well and get things fixed!!!!

I was using a Variable to make alexa announce and to change the status of a keypadlinc button. To take variables out of the equation I used a Node server Called Virtual Buttons that basically pushes a button to make alexa do something. If I push the button in the Node server its instant. This AM we closed a garage door and also had motion in the driveway. Two separate devices with two separate programs. Both used the new virtual buttons. Both light up a keypad button. With both of them the device was triggered. Alexa said nothing and the keypadlinc button did not light up. About 5 min later Alexa said something and I looked and the keypadlinc was lit up. for the motion it worked once right away but a few min later I see the device trigger again (someone walked past the motion) in the ISY but the program has yet to run at all. So its a delay and sometimes a total ignore for me. Makes me wonder what else is not working. Like I have leak sensors. What if there is a leak. Will it let me know?

If you would update the Node server I would contribute both financially and also testing. I can give you access to my Hue account. I only have a few bulbs and lightstrip so if you accidentally turn one on or off it wont bother anyone. Let me know if you are interested. I think you could charge 20-30 for a pg3 hue Node server.

Its just as easy for me to make variables for the holiday dates which I have a reminder set in the ISY to remind me to do them the first of each year. but with all this said there are lots of US holiday feeds out there. It cant be that hard to have a Node server check the feed and import the name of the holiday can it? Probably dont have the programming knowledge to do it myself though.

Yes tried them both. Neither can give me a field with holiday name Like Holiday today. Holiday name Yes. Christmas No. None

see screenshot under the Sun part of TimeData

The problem is it will identify a holiday or a day off but unless there’s something wrong on my end it doesn’t tell you the actual name of the holiday which is what I want

Is Holidays not possible? Like you have Spring, Fall, etc. How about list the holiday if that day is a holiday. I can config most of them except easter with programs but so much easier to say if Easter then do this

I reported to @bpwwer. Somewhere it must think we are still on older version.

FYI. I updated last night but today it told me I need the update. I already had it. Strange. That message was not there last night. I will send to @bpwwer You can see version number in screenshot already up to date

me too

Same issue here. Restarted and its on 3.3.1 not 3.3.2 but the UPDATE needed notice went away.

I disabled an insteon motion sensor. It kept working. So I had to disable the programs that it uses. I did confirm it has the red circle over the device. Confirmed with another insteon device also.

I had this issue too yesterday. Yale Z-Wave locks also. I did update neighbors to all powered devices in order from the Polisy to the furthest device. It you go to event viewer you should get success on each one. Then do update neighbors on yourr locks last. At that point all locks worked but one. On that one i took out the batteries for 30 seconds (not the z-wave module) and then put back in and then waited a minute for lock to reboot. Then I updated neighbors on that lock and it worked. Now they are all working.

It seems like ANY of the programs for Garage door 1, 2, 3 or even motion dont run after a long wait. Then they all run. like the propgrams need to be woken up. I will try the run other program idea but there are no other programs that do it.

Even with 3.08 it still said 3.06. This is a VERY easy Node server to setup. No API keys or anything so I went ahead and deleted and added back. Now it says 3.08.

Nature did the unplugging. We just got power back after that. But that did not fix it. But everyone is concentrating on the IO-Lincs. Its also all my motion sensors.

it was on 2. Increased to 10. waited an hour and then opened door. Nothing. Closed door worked right away. Opened door- nothing. Remember this is also happening with motion sensors. The first trigger in the morning or after long wait does nothing. Then it works.

If the wires were not making good contact then the status would not change. The status changes in the ISY so its working. I am using Momentary so let me play with the hold time.

correct me if I am wrong but if the logs have no mention of that program but DOES have it when it works then the wait times would not matter. The program is not even running. Correct?

Remember this works just fine if I run it multiple times in a row. Its after sitting a while like first thing in AM that it does not work the first time. And I have checked to make sure program did not run Garage 1 Open - [ID 00C1][Parent 029A] If 'Garage / Garage Door 1- Sensor' is switched On Then $GarageOpen_1 = 1 Wait 1 second $GarageOpen_1 = 0 Else - No Actions - (To add one, press 'Action')